DJI Osmo third-person helmet mount used for immersive skiing and outdoor action camera footage

Osmo Third-Person Helmet Mount Kit

Curved base fits helmets securely and sticks firmly. Paired with a carbon fiber rod, it enables unique third-person tracking shots.

$39.00 USD

  • Curved base fits helmets securely and sticks firmly. Paired with a carbon fiber rod, it enables unique third-person tracking shots.

Curved base fits helmets securely and sticks firmly. Paired with a carbon fiber rod, it enables unique third-person tracking shots.

Take a Closer Look

Overview

The curved base fits snugly against the helmet and adheres firmly to stay in place. Paired with a high-strength carbon fiber straight rod, it enables a distinctive third-person tracking perspective.

Tips

1. When attaching the base, press firmly for more than 30 seconds, and let it sit for 30 minutes to ensure adhesion.

2. This product is intended for one-time use on clean, curved surfaces only. If the surface is not sufficiently smooth, apply the included adhesive pad first, then attach the base.

3. The ideal application temperature is between -10°C and 40°C (14° F to 104° F).

4. After wearing, be sure to tighten the locking nut to prevent shaking or displacement due to significant bumps during movement.

5. While capturing 360° shots, The bottom of the camera facing the helmet may be closer than the minimum required stitching distance. Adjust the angle and composition to avoid close-range stitching flaws at the bottom.

In The Box

  • Osmo Curved Adhesive Base Max × 1
  • 28 cm Carbon Fiber Straight Rod × 1
  • 1/4" Thread to Dual Prong Adapter × 1
  • Osmo Action Quick-Release Adapter Mount × 1
  • Osmo Locking Screw × 1
  • Screw Locking Wrench × 1
  • Hex Key × 1

Specifications

Osmo Curved Adhesive Base Max

Dimensions: Approx. 50 × 55 × 24 mm (L × W × H)

Weight: Approx. 17 g

Hex Key

Dimensions: Approx. 53 × 97 × 16 mm (L × W × H)

Weight: Approx. 8 g

28cm Carbon Fiber Straight Rod

Dimensions: Approx. 291 × 17 × 23 mm (L × W × H)

Weight: Approx. 45 g

Osmo Locking Screw

Dimensions: Approx. 13.3 × 23 × 55.6 mm (L × W × H)

Weight: Approx. 12 g

1/4'' Thread to Two-Prong Adapter

Dimensions: Approx. 32×18×18 mm (L×W×H)

Weight: Approx. 9 g

Osmo Action Quick-Release Adapter Mount

Dimensions: Approx. 41×21×34 mm (L×W×H)

Weight: 16 g

Compatibility

Osmo 360